Some electrical jobs get planned well in advance. A homeowner schedules a panel upgrade before a kitchen renovation. A landlord lines up rewiring work between tenants. A property manager books an inspection before a lease is signed. Those calls come in with a date in mind and a scope already forming. We handle those.
Other calls come in because something stopped working this morning and it cannot wait. A breaker that will not reset. Outlets with no power on one side of a house. A flickering that started overnight and has not stopped. For those calls, we pick up the phone from 6:00 AM to 9:30 PM every day and talk through what is happening before anything is scheduled. That is how we work for Exeter Township, and it is the same process whether the job is a single outlet or a full service upgrade.
When you call, the conversation starts with the job, not with paperwork. You describe what is happening, or what you need done, and we scope the work on the phone. The rate is confirmed before anything is booked. You do not commit to a visit until you know what it covers and what it costs.
For jobs that need to move quickly, we take short-notice and urgent calls. If a fault is creating a safety concern, say so when you call and we will tell you what the schedule allows. We do not promise a window we cannot keep, but we do take the situation seriously and work around what the property needs.
For businesses and rental units that have to stay operational, the scope of the visit gets established on the call so the work can be planned around the hours that matter. A retail space that needs lighting work done before it opens, or a rental property where a tenant is still in place, gets the same scheduling conversation as any other job. With a local company, a question about the work gets a straight answer.
The gap between tenants is one of the most practical windows for electrical work that would otherwise be disruptive. No one is living in the space, which means circuits can be de-energized without affecting a household, walls can be opened if the wiring requires it, and the work can be completed without coordinating around a family's schedule.
Older properties in this area often have wiring that has been added to over the years without a full review. A vacancy is the right time to assess what is there, address anything that needs correction, and bring the circuits up to current standards before a new tenant moves in. Landlords who use that window for an electrical safety inspection often find it simpler to handle the work then than to schedule around an occupied unit later.
Access is arranged on the call. If a property manager or owner cannot be on-site, we confirm the scope and the price before the visit so there are no decisions left to make at the door.
Some faults are straightforward. A GFCI has tripped upstream and the outlet downstream has no power. A breaker has reached the end of its life and trips under a load it used to carry without issue. Others take more work to locate. An intermittent trip that only shows up under certain conditions, or a fault that appears on one circuit but traces back to a connection point two rooms away, requires following the circuit back to find where the problem actually is. We diagnose the cause before we repair it, and we explain what we found before any work starts.
Arc-fault and ground-fault protection is part of that conversation when it belongs. AFCI breakers catch faults that standard breakers miss, and GFCI protection is required in kitchens, bathrooms, garages, and outdoor circuits. When a fault diagnosis turns up a gap in that protection, addressing it is part of the same visit.
A panel with unlabeled or mislabeled breakers is a problem that compounds over time. It slows down every subsequent repair visit, makes it harder to isolate a circuit safely, and leaves the property without a clear record of what is connected to what. Properties that have been added to over the years are especially prone to this: circuits get run, breakers get added, and the labeling never catches up.
We identify each circuit, confirm what it feeds, and label the panel accurately. For older properties where the wiring history is unclear, circuit identification is often the first step before any other electrical work is scoped.
Recessed lighting installs are common in finished basements, kitchens, and living rooms where a homeowner wants even light coverage without surface-mounted fixtures. The job varies depending on what is above the ceiling. An unfinished space above makes the wiring run straightforward. A finished ceiling requires more care to route the circuit without opening large sections of drywall.
LED retrofits reduce the load on a circuit and extend the life of the fixtures considerably. Where an older home has a mix of fixture types on the same circuit, consolidating to LED often resolves dimming and flickering that was being caused by incompatible load combinations.
Two-prong outlets in an older home are a sign the wiring behind them is worth a closer look. Replacing them with grounded three-prong receptacles is part of a broader assessment of the circuit feeding them. Where the wiring supports it, the replacement is direct. Where it does not, the options get explained before any work proceeds.
GFCI outlets in kitchens and bathrooms, USB receptacles in bedrooms and home offices, dimmer switches for living areas, and standard replacements for outlets and switches that have worn out are all routine visits. Exterior outlets and switches get weatherproof covers and GFCI protection as part of the installation.
The price for any job is confirmed on the call, based on what you describe. For a straightforward replacement or a single outlet installation, the scope is usually clear enough to give you a rate before the visit is booked. For a panel upgrade, a rewiring project, or a fault diagnosis where the cause is not yet known, the scope gets established on-site before the work starts, and the price is confirmed before anything proceeds.
Three things tend to move a quote. The first is what the fault turns out to be once it is traced back to its source. A symptom at an outlet can have its cause at the outlet, at the breaker, or somewhere in the wiring between them. The second is what has to be opened up to reach it. Wiring inside finished walls takes more time to access than wiring in an open basement or attic. The third is whether the existing panel or circuit can carry the change being requested. An EV charger circuit or a dedicated appliance circuit sometimes requires a panel capacity check before the circuit is run, and if the panel is undersized, that becomes part of the scope.
You get the rate before anything is scheduled, and if the scope changes on-site, you are told why before we proceed. If you want to see the whole range first, try the page listing our electrical services.
Panels in properties this size tend to sit in a basement, a utility room, or a garage. Knowing where yours is before the visit starts saves time. If access to the panel requires moving storage or clearing a path, doing that ahead of the visit means the work can start without delay.
For visits that involve circuit work, knowing which outlets, switches, or fixtures are affected helps us confirm the scope on arrival. If the problem is intermittent, a note on when it tends to happen and what was running at the time gives us something to work with during diagnosis.
The electrician confirms the scope on arrival, explains what the work involves, and starts once the price is agreed. If something inside the wall or at the panel changes what the job requires, you are told before any additional work is done. Nothing proceeds beyond the agreed scope without your say-so.
For jobs that involve de-energizing a circuit or the main service, the visit timing is confirmed on the call so you can plan around it. Most outlet and switch work affects only the circuit being worked on. Panel work may require the main service to be off for part of the visit.
We serve Exeter Township and the nearby communities throughout Berks County, including Jacksonwald, Reiffton, Lorane, St. Lawrence, and Gibraltar. If your property is in or near Exeter Township, the work is handled locally and the scheduling process is the same wherever you are in the area.
Properties in this area frequently have wiring that has been added to over the years without a full review, and older homes may still have knob-and-tube or aluminum branch wiring in parts of the house. Panel labeling gaps, undersized circuits, and two-prong outlets without grounding are also common. An electrical safety inspection is a practical starting point if the wiring history of the property is unclear.
The electrical supply to a heating or cooling unit is our work: the dedicated circuit, the disconnect, and any panel capacity needed to carry the load. The equipment itself, including the furnace, air conditioner, heat pump, or mini-split, is installed and serviced by an HVAC contractor. We coordinate the electrical side so the circuit is ready when the equipment installer arrives.
Yes. When you call, we scope the work on the phone and explain what the job involves before any visit is scheduled. That conversation gives you enough information to decide whether to proceed. There is no obligation to book a visit before you have a clear picture of what the work entails.
Yes. Landlords and property managers call us for safety inspections, circuit work, outlet and lighting installation, and panel assessments. Vacancy periods are a practical window for that work, and we confirm the scope and price before the visit so the job can proceed without the owner needing to be on-site for every decision.
Rough-in is the stage of a renovation where the wiring is run through the framing before the walls are closed. Trim-out is the final stage where devices, fixtures, and covers are installed after the walls and ceilings are finished. Both stages require the electrician to be on site at the right time, and we coordinate with the general contractor or the homeowner to make sure the sequencing works.
Yes. A Level 2 EV charger requires a dedicated 240-volt circuit, and major appliances like dryers and ranges each perform better on their own circuit rather than sharing one. We assess the existing panel capacity as part of that conversation, and if an upgrade is needed to support the load, we scope that as part of the same job.
If a new appliance has a higher draw than the circuit was sized for, the existing circuit may not be adequate and the breaker may trip under normal use. We check the circuit rating against the new appliance's requirements and either confirm it is sufficient or run a dedicated circuit sized correctly for the load. This is a common situation when upgrading to a larger range, dryer, or HVAC unit.
Yes, and intermittent faults are often more important to report quickly than ones that are constant. A problem that appears and disappears can point to a loose connection or an early-stage arc fault, both of which can worsen without warning. Waiting for the fault to become consistent is not the safer option.
The next step is a phone call. You describe the job, we scope it, and you have a price before anything is booked. No forms, no back-and-forth, nothing more complicated than that.
Call Reading Electrical Company at (484) 926-6495 any day from 6:00 AM to 9:30 PM.
One number. One call. One electrician at your door.
Towns a short way out: Reiffton, Lorane, Pennside, Lower Alsace Township, Amity Township, Pottstown.
There is more on our list of towns.
Below is a plain-language look at the electrical services we handle for homes and businesses in Exeter Township, Berks County and across Berks County. Each row covers what the work involves, who it fits best, and one practical thing worth knowing before you call. If you have a specific situation in mind, call us and we will scope it out before anything is scheduled.
| Service | What's Included | Best For | What to Keep in Mind |
|---|---|---|---|
| Basement & Sump-Pump Circuits | Dedicated sump-pump circuit installationBasement outlet and lighting wiringGFCI protection in below-grade spacesCircuit capacity check before installation | Homeowners finishing a basement or adding a sump pump to an older home | Below-grade spaces require GFCI protection on outlets by code. A dedicated circuit for a sump pump keeps it from sharing load with anything else. |
| Breaker & Fuse Repair | Breaker replacementFuse panel serviceTripped or stuck breaker diagnosisAFCI and GFCI breaker upgrades | Any property where a breaker trips repeatedly or will not reset | A breaker that keeps tripping is often a symptom of a wiring fault or an overloaded circuit, not just a bad breaker. We trace the cause first. |
| Electrical Panel UpgradesMost Popular | Service entrance upgrade200-amp panel installationSubpanel installationLoad calculation and permit handling | Homes adding EV chargers, generators, or major appliances to an undersized or aging panel | Panel upgrades typically require a permit and a final inspection. We handle that process as part of the job. |
Call (484) 926-6495 to get a price and get on the schedule. We are available seven days a week from 6:00 AM to 9:30 PM.
(484) 926-6495